   If you are interested in obtaining a copy to 
Heavy Metal, you may contact them by voice at (415) 
965-4090 or by modem at (415) 965-4097.

   This system supports both 300 and 1200 baud.  If 
you want to download from this system, you must also 
use the MODEM protocol. This is 8 bit, no parity.

   As always, this system will operate 24 hours per 
day, except for maintainence time which we try to 
restrict to daylight hours, Monday to Friday.

   Because FOG membership funds support this system, 
a portion of it will be restricted to FOG members.  
Non members will be allowed to use the message 
system and user levels 0 thru 3. Members have access 
up to user level 8.

   Xmodem (for downloading files) has a 30 minute 
maximum on it.  This is because we do not yet have a 
clock installed on the system and some users were 
abusing the system by downloading very large 
libraries.

   All of the FOG library disks are on this system.  
All library disks will be consilidated into .LBR 
files.  For more information, use the command:
                  HELP XMODEM<cr>

   If you are using 1200 baud, you will be able to 
download the entire "disk" (actually a .LBR file).  
If you are using 300 baud, this option will not be 
available to you.  You will need to download 
individual files.  Use the 
       XMODEM L librname.LBR filename.typ<cr>
command.  (replace the LIBRNAME with the actual name 
of the .LBR file (APP#022 for example) and the 
filename.typ with the actual name of the file you 
want to download.

   For assistance with the use of this system, type 
the word: HELP<cr> when you first Jump to CP/M.  If 
you are already on the system when you need help, 
you should first type:
                SECTION HELP.PUB<cr>
before calling on the HELP files.


   This system has been completely reworked over the 
last several months.  Non members have access to 
more areas and there are now subject sections such 
as UTILITY.PUB (for handy utility programs), 
GAMES.PUB (for games which should work on most 
systems), LOBOMAX.PUB (for programs which only work 
on the LoboMax), and so on.  Use the SECTION command 
to get a list of available sections.

   You should use this command to move around any of 
the FOG systems since not all systems are set up 
quite the same way.  Type SECTION<cr> for more info.

   Another good command for moving around is the LOG 
command.  Type LOG<cr> for more information.

   To find a specific file (for example, all of the 
WordStar patch files) just type:
                   FIND WS*.*<cr>
Replace the WS*.* with the filename you are seeking.

   You should also check out the special version of 
the SRX catalog program which is now on the section 
LIBRARY.FOG.


