#
#       Digital Research Installation Program Configuration File
#       for 5.25 inch disk set.  
#			 Artline Version 2.0
#				8/29/90
#
#               Graphic Environment Manager Version
#
|DEFINE|        FLOPPY/ A:\             Source Disk Path
|DEFINE|        SRC/    A:\             Setup Location
|DEFINE|        DRV/    C:\             Destination Drive
|DEFINE|        NODE/   DRV/ARTLINE\    User's File Path
|DEFINE|        APP/    DRV/ARTLINE\    Artline Destination Path
|DEFINE|        FONTS/  APPLDIR/FONTS\  Fonts Destination Path
|DEFINE|        GDRV/   C:\             GEM/3 Destination Drive
|DEFINE|        GEMSYS/ GDRV/GEMAPPS\GEMSYS\ GEM/3 Desktop path
|DEFINE|        GEMAPPS/ GEMSYS/..\         GEMAPPS not editable!

|DEFINE|        APPLDIR/        APP/     Applications directory
|DEFINE|        SYSDIR/         APPLDIR/ARTSYS\  System Software directory

|VERSION| 3.94
|NODEFILE| NODE/ART.TAB
|NODEPARMS|
/m=[POINTERS.SELECTED.PORTS][POINTERS.SELECTED.MICE]
/s=[SCREENS.PRIMARY.DRVRNAME]
/f=<:FONTS/><+FONTS/>
/n=<APP/>
/i=[ROOT.TYPE.NODE]
/y=<SYSDIR/>DRIVDI.EXE
/h=<GEMAPPS/>ARTLINE2.APP
/k=ON
/o=TSP
!<APPLDIR/>ARTLINE.APP
|MIN_REV| 3.91
|CUR_REV| 3.91

|AGGREGATE| ROOT
|DISPLAY| Artline Installation
|COMPONENT| WELCOME
|COMPONENT| NEW_CHANGE
|COMPONENT| EDIT_PATHS
|COMPONENT| SCREENS
|COMPONENT| POINTERS
|COMPONENT| PRINTERS
|COMPONENT| PLOTTERS
|COMPONENT| CAMERAS
|COMPONENT| NEW_INSTALL
|COMPONENT| REVIEW_SELECTIONS
|COMPONENT| INSTALL
|COMPONENT| GOODBYE
|CONTINUE| .f
.ap
.nj
        Continuing from this menu indicates your acceptance of the
Artline installation and returns you to the operating system prompt.
.f
|HELP| .f
.ap
.nj
        You are now in the Expert mode.  Expert mode lets you select only
those options you want to change; you do not have to go through all the
screens.
.s
        Check that your configuration for this installation is correct
before continuing.  When you are finished making your selections, go
to the Installation Window to start the Artline installation.
.f
|END| ROOT


|AGGREGATE| WELCOME
|DISPLAY| Installation Notes
|HELP| .f
.ap
.nj
        These notes contain information that introduces you to the Artline
installation.
.f
|DIRECTIONS| .f
.ap
.nj
        Select this option if you want to view the installation notes
for Artline.
.f
|VOLUME| ALWELCOM.TXT
|PROMPT| Insert disk labeled Setup and Application into the source drive.
|PAGE| ALWELCOM.TXT
|END| WELCOME


|AGGREGATE| NEW_CHANGE
|UNSELECTED|
|DISPLAY| Select Installation Mode
|IMMEDIATELY|
|TIMESTAMP|
|ONLY1|
|1REQD|
|CONTINUE| .f
.ap
.nj
        Press Enter to continue from this menu. This indicates your
acceptance of the installation mode you have selected.
.f
|COMPONENT| NEW
|COMPONENT| CHANGE
|HELP| .f
.ap
.nj
        Select the installation mode desired.  Selecting "New
Installation" indicates that you wish to begin a new installation of
Artline, or re-install it.  Selecting "Change Existing Installation"
indicates that you wish to leave your existing installation intact and
make changes to your earlier selections.
.f
|DIRECTIONS| .f
.ap
.nj
        Select your installation mode.
.f
|FILEDESC| Application Invocation Batch Files
|PROMPT| Generating batch files
|VOLUME| SETUP.EXE
|DIRECTORY| DRV/
|ALWAYS_COPY|
|CREATE| ARTLINE.BAT echo off
set DRIAESEMS=OFF
<SYSDIR/>chkfonts /i=[ROOT.TYPE.NODE]
<SYSDIR/>drivdi <APPLDIR/>ARTLINE.APP %%1 %%2 %%3 %%4 %%5 %%6 %%7 %%8 %%9 /i=[ROOT.TYPE.NODE]
if  errorlevel==1 echo Unable to load ARTLINE.  Check your installation.

|DIRECTORY| DRV/
|ALWAYS_COPY|
|CREATE| ALSETUP.BAT echo off
<APP/>SETUP\\SETUP -a -f <SYSDIR/>ARTLINE.CFG %%1 %%2 %%3 %%4 %%5 %%6 %%7 %%8 %%9
if exist <NODE/>DESKTOP.INF del <NODE/>DESKTOP.INF

|DIRECTORY| APP/SETUP\
|CREATE| VPSETUP.BAT echo off
<APP/>SETUP\\SETUP -f <APP/>SETUP\\VP5.CFG %%1 %%2 %%3 %%4 %%5 %%6 %%7 %%8 %%9

|VOLUME| SETUP.EXE
|PROMPT| Insert disk labeled Setup and Application into the source drive.
|SOURCE| FLOPPY/
|DIRECTORY| APP/SETUP\
|FILES| *.EXE *.MSG *.TXT
|DIRECTORY| APPLDIR/
|FILES| *.PIF


|ARCHIVE| SYS.DRI
|SOURCE| FLOPPY/
|DIRECTORY| SYSDIR/
|METAFILE| MDDRI10.SYS
|FILES| DRIAES.RSC DRI*.EXE
|FILES| CHKFONTS.EXE
|DIRECTORY| APPLDIR/
|FILES| OUTPUT.*
|DIRECTORY| APP/SETUP\
|FILES| MAKEG4SH.COM

|ARCHIVE| APPS.DRI
|SOURCE| FLOPPY/
|DIRECTORY| APPLDIR/
|FILES| *.*

|ARCHIVE| ART.DRI
|SOURCE| FLOPPY/
|DIRECTORY| APPLDIR/ARTWORK\
|FILES| *.GEM
|DIRECTORY| APPLDIR/IMAGES\
|FILES| *.IMG

|PROMPT| Insert disk labeled System into source drive.
|ARCHIVE| SYSTEM.DRI
|SOURCE| FLOPPY/
|DIRECTORY| APPLDIR/FONTS\
|FILES| *.AF4

|PROMPT| Insert disk labeled Fonts and Clipart 1 into source drive.
|ARCHIVE| CLRTL.DRI
|SOURCE| FLOPPY/
|DIRECTORY| APPLDIR/COLORS\
|FILES| *.COL
|DIRECTORY| APPLDIR/TOOLS\
|FILES| *.TLS

|ARCHIVE| VP5.DRI
|DIRECTORY| APP/SETUP\
|FILES| *.*

|ARCHIVE| PRINTPNT.DRI
|DIRECTORY| APPLDIR/COLORS\
|FILES| *.*

|END| NEW_CHANGE


|AGGREGATE| NEW
|DISPLAY| New Installation
|SMART| 0
|MODE| 1
|HELP| .f
.ap
.nj
        Select this item to install Artline for the first time, or to
re-install it.  This means that no pre-existing installation is expected
to exist: you will be prompted as you go along for all the information
required.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select this highlighted item if you are installing
Artline for the first time, or if you wish to re-install it.
.f
|END| NEW


|AGGREGATE| CHANGE
|DISPLAY| Change Existing Installation
|MODE| 2
|SMART| 1
|HELP| .f
.ap
.nj
        Select this item if you wish to change your existing Artline
installation.  This means that a previous installation must have been
performed and information about it must exist.  You will be presented with
menus that indicate the selections in effect for the existing installa-
tion; you may then change those selections according to your new needs.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select this highlighted item if you wish to
change an existing Artline installation.
.f
|END| CHANGE


|AGGREGATE| EDIT_PATHS
|DISPLAY| Source and Destination paths
|CONTINUE| .f
.ap
.nj
        Press Enter to accept the paths as they are currently set and
continue with the Artline installation.
.f
|COMPONENT| EDIT_SRC
|COMPONENT| EDIT_DRV
|COMPONENT| EDIT_APP
|COMPONENT| EDIT_FONTS
|COMPONENT| USE_OLD_SYS
|COMPONENT| EDIT_GEMSYS
|HELP| .f
.ap
.nj
        This menu allows you to change the source and destination
paths for this Artline installation; these paths control the
location of your Artline files.  Make sure that it is set to the
directory into which you want the file that invokes Artline
(ARTLINE.BAT) and your other files placed.
.f
|DIRECTIONS| .f
.ap
.nj
        This menu allows you to change the source and destination
paths for this Artline installation.
.f
|DIRECTORY| DRV/
|APPROXSIZE| 7500 APP/
|END| EDIT_PATHS


|AGGREGATE| EDIT_SRC
|DISPLAY| Change your Source Drive
|EDITPATH| FLOPPY/
|HELP| .f
.ap
.nj
        You may alter your source drive in order to use any floppy
drive on your machine.  A:\ (the source drive default) is usually the
appropriate drive for the user, but any floppy drive that accepts the
right size media can be used.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to alter your source drive.  This is the drive
into which you will insert diskettes as they are requested during the
Artline installation.  This must be a floppy drive.
.f
|END| EDIT_SRC


|AGGREGATE| EDIT_DRV
|DISPLAY| Change your Destination Drive
|EDITPATH| DRV/
|HELP| .f
.ap
.nj
        You may alter your destination drive.  This is the root
location into which files and directories will be placed during the
installation of Artline.  Altering this will also alter the
application path; however, if you want the application path to have a
different drive or directory, you can still change that.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to alter your destination drive.  This is the
default root location into which directories and files will be placed
during installation of Artline. This value should be either the
root or a directory on your hard disk.
.f
|END| EDIT_DRV


|AGGREGATE| EDIT_APP
|DISPLAY| Change your Application Path
|EDITPATH| APP/
|HELP| .f
.ap
.nj
        You may alter your application path.  This is the location
into which Artline applications and related files are copied.
This location must be on your hard disk.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to alter your application path.  This is the
directory into which Artline files and subsidiary directory
structures will be installed.  This location must be on your hard
disk.
.f
|END| EDIT_APP


|AGGREGATE| EDIT_FONTS
|DISPLAY| Change your Fonts Path
|EDITPATH| FONTS/
|HELP| .f
.ap
.nj
        You may alter your fonts path.  All screen and printer fonts
will be placed in this location during installation.  This facilitates
sharing of font files.  This location must be on your hard disk.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to alter your fonts path.  This is the location
into which all screen and printer fonts will be placed during
installation.  This location must be on your hard disk.
.f
|END| EDIT_FONTS


|AGGREGATE| USE_OLD_SYS
|UNSELECTED|
|DISPLAY| Do you have GEM Desktop on your system?
|HELP| .f
.ap
.nj
	Select this option if you wish to be able to invoke Artline from an
existing GEM/3 installation.  (Selecting this will not install GEM/3.)
.f
|DIRECTIONS| .f
.ap
.nj
	Select this option if you wish to be able to invoke Artline from an
existing GEM/3 installation.  (Selecting this will not install GEM/3.)
.f
|FILEDESC| Creating ARTLINE2.APP for use under GEM/3.
|PROMPT| Make sure that the file MAKEG4SH.COM is in the Setup directory.
|VOLUME| SETUP.EXE
|SOURCE| APP/SETUP\
|EXECUTE| MAKEG4SH.COM
|CMDTAIL| /h=<GEMAPPS/>ARTLINE2.APP /i=[ROOT.TYPE.NODE]
|END| USE_OLD_SYS


|AGGREGATE| EDIT_GEMSYS
|UNSELECTED|
|DISPLAY| Path to GEM\/3 Desktop
|EDITPATH| GEMSYS/
|HELP| .f
.ap
.nj
	You must provide the path to which GEM/3 Desktop is installed.
.f
|DIRECTIONS| .f
.ap
.nj
	You must provide the path to which GEM/3 Desktop is installed.
.f
|END| EDIT_GEMSYS


|AGGREGATE| SCREENS
|USEADMSEL|
|DISPLAY| Select Screen(s)
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your screen driver selections and
continue with the Artline installation.
.f
|COMPONENT| SD_SHOW_CUR
|COMPONENT| SDATT
|COMPONENT| SDGEN
|COMPONENT| SDGSV
|COMPONENT| SDHRC
|COMPONENT| SDPSC
|COMPONENT| SDEHF
|COMPONENT| SDPSM
|COMPONENT| SDDRIVERPAKS
|SELECTAGAIN| PRIMESD
|1REQD|
|HELP| .f
.ap
.nj
        DRI's System Software requires at least one screen driver.
If you select more than one, you will be asked to designate one of those
selected as the primary screen driver.
.f
|DIRECTIONS| .f
.ap
.nj
        Enter this menu item to select screen drivers to support the
screens available on your system.
.f
|END| SCREENS


|AGGREGATE| PRIMESD
|UNSELECTED|
|DISPLAY| Designate Primary Screen Driver
|1REQD|
|ONLY1|
|IMMEDIATELY|
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your primary screen driver selection and
continue with the Artline installation.
.f
|HELP| .f
.ap
.nj
        DRI's System Software requires that one screen driver be
designated as the primary screen driver when more than one has been
selected.
.f
|END| PRIMESD


|AGGREGATE| SD_SHOW_CUR
|DISPLAY| Display Current Selections
|SHOWCUR|
|IMMEDIATELY|
|HELP| .f
.ap
.nj
        Choose this item to view your current selections.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to display all of your current selections.
.f
|END| SD_SHOW_CUR


|AGGREGATE| SDDRIVERPAKS
|DISPLAY| Load Additional 4.0 Screen Driver Packs...
|SOURCE| FLOPPY/
|PROMPT| Insert 4.0 Screen Driver Pack to load.
|CONTROL| DP.CFG
|HELP| .f
.ap
.nj
        Select one of the retail driver packs listed here.  If you do not
have one of these, suitable device drivers can be ordered from DRI
Technical Support.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to add a device distributed on a driver pack to your
available screen selections.  You must also select the device before it
can be included in the installation.
.f
|END| SDDRIVERPAKS


|AGGREGATE| SDATT
|DISPLAY| AT&T Monochrome Card
|ICON| AT&T Mono
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.  You
should select this item if your system is equipped with an AT&T PC with
its native graphics adapter card and monochrome display.  This display
offers a resolution of 640 horizontal by 400 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDATT10.EGA
|SUPERSEDES| SDATT10.EGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts and Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.EGA
|SUPERSEDES| A[AI]*.EGA

|END| SDATT


|AGGREGATE| SDHRC
|DISPLAY| Hercules Graphics Card/Monochrome PC display
|ICON| Hercules
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.  You
should select this item if your system is equipped with the Hercules
Graphics Card and monochrome PC display.  This display offers a resolution
of 720 horizontal by 348 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDHRC10.EGA
|SUPERSEDES| SDHRC10.EGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts and Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.EGA
|SUPERSEDES| A[AI]*.EGA

|END| SDHRC


|AGGREGATE| SDEHF
|DISPLAY| IBM EGA Card & 16-Color Display
|ICON| EGA HiRes 16
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.  You
should select this item if your system is equipped with an IBM Enhanced
Color Display and an IBM Enhanced Graphics Adapter Card with at least
128k of graphics memory.  This 16-color display offers a resolution of
640 horizontal by 350 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDEHF10.EGA
|SUPERSEDES| SDEHF10.EGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts and Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.EGA
|SUPERSEDES| A[AI]*.EGA

|VOLUME| AI0100GA.EGA
|FILES| ARTLINE.TLS

|END| SDEHF


|AGGREGATE| SDPSC
|DISPLAY| IBM VGA, 16-Color
|ICON| VGA Color
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.
You should select this item if your system is equipped with an IBM
16-color VGA card and color display.  This display offers a resolution of
640 horizontal by 480 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDPSC10.VGA
|SUPERSEDES| SDPSC10.VGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.VGA
|SUPERSEDES| A[AI]*.VGA
|END| SDPSC


|AGGREGATE| SDGEN
|DISPLAY| GENIUS Full Page
|ICON| Genius
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.
You should select this item if your system is equipped with The GENIUS
Monitor and The GENIUS Monitor Card by Micro Display Systems.  This
monochrome display offers a resolution of 728 horizontal by 1008 vertical
pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDGEN10.VGA
|SUPERSEDES| SDGEN10.VGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.VGA
|SUPERSEDES| A[AI]*.VGA
|END| SDGEN


|AGGREGATE| SDGSV
|UNSELECTED|
|DISPLAY| Genoa Super VGA Card
|ICON| Genoa VGA
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.
You should select this item if your system is equipped with the Genoa
Super VGA Graphics Card and color display.  This display offers a
resolution of 800 horizontal by 600 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDGSV10.VGA
|SUPERSEDES| SDGSV10.VGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.VGA
|SUPERSEDES| A[AI]*.VGA
|END| SDGSV


|AGGREGATE| SDPSM
|DISPLAY| IBM VGA Monochrome
|ICON| VGA Mono
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.
You should select this item if your system is equipped with an IBM
VGA monochrome card.  This monochrome display offers a resolution of
640 horizontal by 480 vertical pixels.
.f
|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| SDPSM10.VGA
|SUPERSEDES| SDPSM10.VGA

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.VGA
|SUPERSEDES| A[AI]*.VGA
|END| SDPSM


|AGGREGATE| POINTERS
|DISPLAY| Select Primary Pointer Device
|IMMEDIATELY|
|ONLY1|
|1REQD|
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your pointer driver selection and
continue with the Artline installation.
.f
|LISTNAME| PORTS
|LIST| 0
|DISPLAY| COM1:
|HELP| .f
.ap
.nj
        This selection indicates that your device is connected to
Serial Communications Port \#1 on your computer's backplane.
.f
|LIST| 1
|DISPLAY| COM2:
|HELP| .f
.ap
.nj
        This selection indicates that your device is connected to
Serial Communications Port \#2 on your computer's backplane.
.f
|LIST| -1
|DISPLAY| Deselect Pointer Device
|HELP| .f
.ap
.nj
        Press Enter to cause this pointer device to no longer be
selected.
.f
|ENDLIST| PORTS
|COMPONENT| POINTER_0
|COMPONENT| POINTER_2
|COMPONENT| POINTER_10
|COMPONENT| POINTER_3
|COMPONENT| POINTER_1
|COMPONENT| POINTER_7
|COMPONENT| POINTER_6
|COMPONENT| POINTER_5
|COMPONENT| POINTER_4
|COMPONENT| POINTER_9
|COMPONENT| POINTER_8
|HELP| .f
.ap
.nj
        DRI's System Software requires one pointer device.  The pointer
device you select will be communicated to the system software by
ARTLINE.BAT, which is created for you based on the selections you make
during the Artline installation. 
.f
|DIRECTIONS| .f
.ap
.nj
        Select the pointer device for your system.
.f
|END| POINTERS


|AGGREGATE| POINTER_0
|DISPLAY| No Mouse
|HELP| .f
.ap
.nj
        Choose this item if your computer is not equipped with a
mouse.  Instead of a mouse, you use the cursor control keys to perform
operations such as cursor movement, dragging, and clicking.
.f
|DIRECTIONS| .f 
.ap
.nj
        Press Enter to select the highlighted item if your computer is
not equipped with a mouse.  Instead of a mouse, you use the cursor
control keys to perform operations such as cursor movement, dragging,
and clicking.
.f
|MOUSE| 0
|PORTS| 0
|END| POINTER_0


|AGGREGATE| POINTER_2
|DISPLAY| Bus Mouse/Requires MOUSE.COM
|HELP| .f
.ap
.nj
        Choose this entry if you are using a bus-type mouse.  This
type of mouse connects to a special hardware board in your computer
and requires that the file MOUSE.COM be contained in the root directory
of your hard disk. Any mouse that uses MOUSE.COM can be used. Refer to
the mouse manufacturer's installation instructions.
.f
|DIRECTIONS| .f 
.ap
.nj
        Press Enter to select the highlighted item if you are using a
bus-type mouse or Logitech mouse.  This type of mouse usually connects
to a special hardware board in your computer and requires that the file
MOUSE.COM be in root directory of your hard disk.  Any mouse that uses
MOUSE.COM can used as a bus-type mouse.
.f
|MOUSE| 2
|PORTS| 0
|END| POINTER_2


|AGGREGATE| POINTER_10
|DISPLAY| IBM Personal System/2 Mouse
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the IBM Personal System/2 Mouse.  This mouse connects to the IBM mouse
port on your computer.
.f
|PORTS| 0
|MOUSE| 10
|END| POINTER_10


|AGGREGATE| POINTER_3
|DISPLAY| Microsoft Serial Mouse (RS232)
|DIRECTIONS| .f 
.ap
.nj
        Press Enter to select the highlighted item only if you are
using a Microsoft Serial Mouse.  This mouse connects to one of the
serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 3
|END| POINTER_3


|AGGREGATE| POINTER_1
|DISPLAY| Mouse Systems PC Mouse/Summamouse/Compatibles
|HELP| .f
.ap
.nj
        Choose this entry if your mouse is any of the above, or if it
is a "generic" mouse.  If you are unsure of the type of mouse you are
using, check to see if the manufacturer's name and the model are on
the bottom of the mouse or in your hardware documentation.  If you are
unable to determine the name and model of your mouse, you are probably
using a generic serial mouse and should choose this entry.  Manager Mouse
and the Torrington Mouse are also generic serial mice.
.f
|DIRECTIONS| .f 
.ap
.nj
        Press Enter to select the highlighted item if your mouse is
any of the above, or if it is a "generic" mouse.  If you are unable to
determine the name and model of your mouse, you are probably using a
generic serial mouse and should choose this entry.
.f
|USE| PORTS
|MOUSE| 1
|END| POINTER_1


|AGGREGATE| POINTER_7
|DISPLAY| Summasketch 961 Cursor-Type Tablet
|DIRECTIONS| .f 
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summasketch 9-inch hand cursor-controlled data tablet.  This
tablet connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 7
|END| POINTER_7


|AGGREGATE| POINTER_6
|DISPLAY| Summasketch 961 Stylus-Type Tablet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summasketch 9-inch stylus-controlled data tablet.  This tablet
connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 6
|END| POINTER_6


|AGGREGATE| POINTER_5
|DISPLAY| Summasketch 1201 Cursor-Type Tablet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summasketch 12-inch hand cursor-controlled data tablet.  This
tablet connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 5
|END| POINTER_5


|AGGREGATE| POINTER_4
|DISPLAY| Summasketch 1201 Stylus-Type Tablet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summasketch 12-inch stylus-controlled data tablet.  This tablet
connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 4
|END| POINTER_4


|AGGREGATE| POINTER_9
|DISPLAY| Summagraphics MM1812 Cursor-Type Tablet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summagraphics 18-inch hand cursor-controlled data tablet.  This
tablet connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 9
|END| POINTER_9


|AGGREGATE| POINTER_8
|DISPLAY| Summagraphics MM1812 Stylus-Type Tablet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using
the Summagraphics 18-inch stylus-controlled data tablet.  This tablet
connects to one of the serial ports on your computer.
.f
|USE| PORTS
|MOUSE| 8
|END| POINTER_8


|AGGREGATE| PRINTERS
|USEADMSEL|
|DISPLAY| Select Printer(s)
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your printer driver selections and
continue with the Artline installation.
.f
|COMPONENT| PD_SHOW_CUR
|COMPONENT| PDELQ
|COMPONENT| PDDJU
|COMPONENT| PDHPB
|COMPONENT| PDHPU
|COMPONENT| PDHPJ
|COMPONENT| PDHXL
|COMPONENT| PDPST_MONO
|COMPONENT| PDPST_COLOR
|COMPONENT| PDPST_APPLE
|COMPONENT| PDTSH
|COMPONENT| PDDRIVERPAKS
|LISTNAME| PORTS
|LIST| 0
|DISPLAY| LPT1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#1 on your computer's backplane.
.f
|LIST| 1
|DISPLAY| LPT2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#2 on your computer's backplane.
.f
|LIST| 2
|DISPLAY| LPT3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#3 on your computer's backplane.
.f
|LIST| 10
|DISPLAY| LPT4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#4 on your computer's backplane.
.f
|LIST| 11
|DISPLAY| LPT5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#5 on your computer's backplane.
.f
|LIST| 3
|DISPLAY| COM1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#1 on your computer's backplane.
.f
|LIST| 4
|DISPLAY| COM2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#2 on your computer's backplane.
.f
|LIST| 20
|DISPLAY| COM3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#3 on your computer's backplane.
.f
|LIST| 21
|DISPLAY| COM4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#4 on your computer's backplane.
.f
|LIST| 22
|DISPLAY| COM5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#5 on your computer's backplane.
.f
|LIST| 5
|DISPLAY| Connected to Device Controller Card
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected
to a device controller card, rather than to a serial/parallel port.
.f
|LIST| -2
|LIST| -1
|DISPLAY| Deselect Printer Device
|HELP| .f
.ap
.nj
        Press the Delete key to cause this device to no longer be selected.
.f
|ENDLIST| PORTS
|DUP|
|HELP| .f
.ap
.nj
        Select all the printers you wish to access using Artline.

|DIRECTIONS| .f
.ap
.nj
        Enter this menu item to select printer drivers to support the
printers available on your system.
.f

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FONTS| PRTRERR.STR

|END| PRINTERS


|AGGREGATE| PD_SHOW_CUR
|DISPLAY| Display Current Selections
|SHOWCUR|
|IMMEDIATELY|
|HELP| .f
.ap
.nj
        Choose this item to view your current selections.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to display all of your current selections.
.f
|END| PD_SHOW_CUR


|AGGREGATE| PDELQ
|DISPLAY| Epson LQ-Series Printers
|ICON| Epson LQ
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using an
Epson LQ-Series Printer. LQ-Series Printers offer a print resolution of
180 x 180 dots per inch. You may de-select this item by pressing Enter,
then choosing "Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDELQ10.ELQ ELQ.ATM
|SUPERSEDES| PDELQ10.ELQ ELQ.ATM

|SOURCE| FLOPPY/
|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.ELQ
|SUPERSEDES| A[AI]*.ELQ
|END| PDELQ


|AGGREGATE| PDHPU
|DISPLAY| HP LaserJet II, Softfonts
|ICON| HPLJ2 SFont
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item to use a Hewlett Packard
LaserJet II for soft fonts (300 x 300 dots per inch).  Soft fonts print
faster than bit-mapped fonts.  To de-select, press Enter, then choose
"Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDHPU10.SYS HPU.*
|CNF| HPU.CNF
|SUPERSEDES| PDHPU10.SYS HPU.*
|END| PDHPU


|AGGREGATE| PDPST_MONO
|UNSELECTED|
|DISPLAY| Monochrome PostScript Printers
|ICON| PostScript
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using a
printer that uses PostScript-type files and the standard Adobe
resident font set: Courier, Helvetica, Times, and Symbol.  You may
de-select this item by pressing Enter, then choosing "Deselect Printer
Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDPST10.SYS PSMONO.PRE
|FONTS| PDPST10.SYS
|CNF| PSMONO.CNF
|SUPERSEDES| PDPST10.SYS PSMONO.PRE PSMONO.CNF
|END| PDPST_MONO


|AGGREGATE| PDPST_COLOR
|UNSELECTED|
|DISPLAY| Color PostScript Printers
|ICON| ColorPScript
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using a
printer that supports color and uses PostScript-type files and the
standard Adobe resident font set: Courier, Helvetica, Times, and
Symbol.  You may de-select this item by pressing Enter, then choosing
"Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDPST10.SYS PSCOLOR.PRE
|FONTS| PDPST10.SYS
|CNF| PSCOLOR.CNF
|SUPERSEDES| PDPST10.SYS PSCOLOR.PRE PSCOLOR.CNF
|END| PDPST_COLOR


|AGGREGATE| PDPST_APPLE
|UNSELECTED|
|DISPLAY| Apple Laserwriters
|ICON| Apple Laser
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using an
Apple Laserwriter.  You may de-select this item by pressing Enter,
then choosing "Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDPST10.SYS PSAPPLE.PRE
|FONTS| PDPST10.SYS
|CNF| PSAPPLE.CNF
|SUPERSEDES| PDPST10.SYS PSAPPLE.PRE PSAPPLE.CNF
|END| PDPST_APPLE


|AGGREGATE| PDTSH
|DISPLAY| Toshiba P321, P341, or P351 Printer
|ICON| Toshiba
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using a
Toshiba 321, 341, or 351 printer.  Each of these printers offers a
print resolution of 180 x 180 dots per inch.  You may de-select this
item by pressing Enter, then choosing "Deselect Printer Device" from
the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDTSH10.ELQ TSH.ATM
|SUPERSEDES| PDTSH10.ELQ TSH.ATM

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.ELQ
|SUPERSEDES| A[AI]*.ELQ
|END| PDTSH


|AGGREGATE| PDHPJ
|DISPLAY| HP PaintJet Printer, 8 colors
|ICON| HP PaintJet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you have an
HP PaintJet printer.  This printer offers 8 colors and a resolution of
180 x 180 dots per inch.  You may de-select this item by pressing Enter,
then choosing "Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDHPJ10.ELQ HPJ.*
|SUPERSEDES| PDHPJ10.ELQ HPJ.*

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.ELQ
|SUPERSEDES| A[AI]*.ELQ
|END| PDHPJ


|AGGREGATE| PDHXL
|DISPLAY| HP PaintJet XL Printer
|ICON| HP PJet XL
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you have an HP
PaintJet printer.  This printer offers 8 colors and a resolution of
180 x 180 dots per inch and can print on either 8.5 x 11 inch paper or
11 x 14 inch paper.  You may de-select this item by pressing Enter,
then choosing "Deselect Printer Device" from the displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDHPJ10.ELQ HXL.*
|SUPERSEDES| HXL.*

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.ELQ
|SUPERSEDES| A[AI]*.ELQ
|END| PDHXL


|AGGREGATE| PDDJU
|DISPLAY| HP DeskJet[+] Printer
|ICON| HP DeskJet
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item if you are using a
Hewlett Packard DeskJet Printer.  This printer offers a print
resolution of 300 x 300 dots per inch.  You may de-select this item by
pressing Enter, then choosing "Deselect Printer Device" from the
displayed list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDDJU10.B30 DJU.*
|SUPERSEDES| PDDJU10.B30 DJU.*

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.B30
|SUPERSEDES| A[AI]*.B30
|END| PDDJU


|AGGREGATE| PDHPB
|DISPLAY| HP LaserJet II, Bit-mapped
|ICON| HPLJ2 Bitmap
|DIRECTIONS| .f
.ap
.nj
        Press Enter to select the highlighted item to use a Hewlett Packard
LaserJet II for bit-mapped fonts (300 x 300 dots per inch). Bit-mapped fonts
print both landscape and portrait on the same page or white text on a black
background. Fonts are automatically installed. To de-select, press Enter,
then choose "Deselect Printer Device" from the list.
.f
|USE| PORTS

|SOURCE| FLOPPY/
|ARCHIVE| SYSTEM.DRI
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| PDHPB10.B30 HPB.*
|SUPERSEDES| PDHPB10.B30 HPB.*

|VOLUME| AI0100GA.EGA
|PROMPT| Insert disk labeled Fonts & Clipart 1 into the source drive.
|DIRECTORY| APPLDIR/FONTS\
|FONTS| A[AI]*.B30
|SUPERSEDES| A[AI]*.B30
|END| PDHPB


|AGGREGATE| PDDRIVERPAKS
|DISPLAY| Load Additional 4.0 Printer Driver Packs...
|SOURCE| FLOPPY/
|PROMPT| Insert 4.0 Printer Driver Pack to load.
|CONTROL| DP.CFG
|HELP| .f
.ap
.nj
        Select one of the retail driver packs listed here.  If
you do not have one of these, suitable device drivers can be
ordered from DRI Technical Support.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to add a device distributed on a driver
pack to your available printer selections.  You must also select the
device before it can be included in the installation.
.f
|END| PDDRIVERPAKS


|AGGREGATE| PLOTTERS
|USEADMSEL|
|DISPLAY| Select Plotter(s)
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your plotter driver selections and
continue with the Artline installation.
.f
|COMPONENT| VD_SHOW_CUR
|COMPONENT| VDDRIVERPAKS

|LISTNAME| PORTS
|LIST| 0
|DISPLAY| LPT1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#1 on your computer's backplane.
.f
|LIST| 1
|DISPLAY| LPT2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#2 on your computer's backplane.
.f
|LIST| 2
|DISPLAY| LPT3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#3 on your computer's backplane.
.f
|LIST| 10
|DISPLAY| LPT4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#4 on your computer's backplane.
.f
|LIST| 11
|DISPLAY| LPT5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#5 on your computer's backplane.
.f
|LIST| 3
|DISPLAY| COM1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#1 on your computer's backplane.
.f
|LIST| 4
|DISPLAY| COM2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#2 on your computer's backplane.
.f
|LIST| 20
|DISPLAY| COM3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#3 on your computer's backplane.
.f
|LIST| 21
|DISPLAY| COM4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#4 on your computer's backplane.
.f
|LIST| 22
|DISPLAY| COM5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#5 on your computer's backplane.
.f
|LIST| 5
|DISPLAY| Connected to Device Controller Card
|HELP| .f
        Press Enter to indicate that your device is connected to a
device controller card, rather than to a serial/parallel port.
|LIST| -1
|DISPLAY| Deselect Plotter Driver
|HELP| .f
.ap
.nj
        Press Enter to cause this device to no longer be selected.
.f
|ENDLIST| PORTS
|DUP|
|HELP| .f
.ap
.nj
        Select all the plotters currently available on your
workstation.  If you have more than one of the same device, use the
Insert key to "duplicate" a device driver.  See the Help for printers
for additional information.
.f
|DIRECTIONS| .f
.ap
.nj
        Enter this menu item to select plotter drivers to support the
plotter available on your system.
.f
|END| PLOTTERS


|AGGREGATE| VD_SHOW_CUR
|DISPLAY| Display Current Selections
|SHOWCUR|
|IMMEDIATELY|
|HELP| .f
.ap
.nj
        Choose this item to view your current selections.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to display all of your current selections.
.f
|END| VD_SHOW_CUR


|AGGREGATE| VDDRIVERPAKS
|DISPLAY| Load Additional 4.0 Plotter Driver Packs...
|SOURCE| FLOPPY/
|PROMPT| Insert 4.0 Plotter Driver Pack to load.
|CONTROL| DP.CFG
|HELP| .f
.ap
.nj
        Select one of the retail driver packs listed here.  If you do not
have one of these, suitable device drivers can be ordered from DRI
Technical Support.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to add a device distributed on a driver
pack to your available plotter selections.  You must also select the
device before it can be included in the installation.
.f
|END| VDDRIVERPAKS


|AGGREGATE| CAMERAS
|USEADMSEL|
|DISPLAY| Select Camera(s)
|CONTINUE| .f
.ap
.nj
        Press Enter to accept your Camera driver selections and
continue with the Artline installation.
.f
|COMPONENT| CD_SHOW_CUR
|COMPONENT| MAGICORP
|COMPONENT| CDDRIVERPAKS
|LISTNAME| PORTS
|LIST| 0
|DISPLAY| LPT1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#1 on your computer's backplane.
.f
|LIST| 1
|DISPLAY| LPT2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#2 on your computer's backplane.
.f
|LIST| 2
|DISPLAY| LPT3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#3 on your computer's backplane.
.f
|LIST| 10
|DISPLAY| LPT4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#4 on your computer's backplane.
.f
|LIST| 11
|DISPLAY| LPT5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Parallel Port \#5 on your computer's backplane.
.f
|LIST| 3
|DISPLAY| COM1:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#1 on your computer's backplane.
.f
|LIST| 4
|DISPLAY| COM2:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#2 on your computer's backplane.
.f
|LIST| 20
|DISPLAY| COM3:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#3 on your computer's backplane.
.f
|LIST| 21
|DISPLAY| COM4:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#4 on your computer's backplane.
.f
|LIST| 22
|DISPLAY| COM5:
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to
Serial Communications Port \#5 on your computer's backplane.
.f
|LIST| 5
|DISPLAY| Connected to Device Controller Card
|HELP| .f
.ap
.nj
        Press Enter to indicate that your device is connected to a device
controller card, rather than to a serial/parallel port.
.f
|LIST| -1
|DISPLAY| Deselect Camera Device
|HELP| .f
.ap
.nj
        Press Enter to cause this device to no longer be selected.
.f
|ENDLIST| PORTS

|HELP| .f
.ap
.nj
        Select all the Cameras currently available on your workstation.
If you have more than one of the same device, use the insert key to
"duplicate" a device driver.  See the Help for printers for additional in-
formation.
.f
|DIRECTIONS| .f
.ap
.nj
        Enter this menu item to select Camera drivers to support the
Camera available on your system.
.f
|END| CAMERAS


|AGGREGATE| CD_SHOW_CUR
|DISPLAY| Display Current Selections
|SHOWCUR|
|IMMEDIATELY|
|HELP| .f
.ap
.nj
        Choose this item to view your current selections.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to display all of your current selections.
.f
|END| CD_SHOW_CUR


|AGGREGATE| MAGICORP
|DISPLAY| MAGICorp Slide Service
|ICON| MAGICorp
|HELP| .f
.ap
.nj
        More information will be available soon regarding the MAGICorp
Slide Service.  Briefly, this is a device that is made available at
MAGICorp.  You send your document to them via telephone for
production.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of the highlighted item.
You should select this item if you have access to a MAGICorp Slide Service.
(US only).
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Fonts and Clip Art 1 into the source drive.
|ARCHIVE| MAGI.DRI
|DIRECTORY| SYSDIR/
|FILES| CDMAGI.SYS CDMAGI.RSC MAGICORP.FNT
|SUPERSEDES| *MAGI*
|END| MAGICORP


|AGGREGATE| CDDRIVERPAKS
|DISPLAY| Load Additional Camera Driver Packs...
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Camera Driver Pack to load.
|CONTROL| DP.CFG
|HELP| .f
.ap
.nj
        Select one of the retail driver packs listed here.  If you do not
have one of these, suitable device drivers can be ordered from DRI
Technical Support.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to add a device distributed on a driver
pack to your available Camera selections.  You must also select the
device before it can be included in the installation.
.f
|END| CDDRIVERPAKS


|AGGREGATE| NEW_INSTALL
|SELECTED|
|PRESELECTED|
|DISPLAY| Artline Utilities & Clip Art
|CONTINUE| .f
.ap
.nj
        Press Enter to accept the selections as they are currently set and
continue with the Artline installation.
.f
|COMPONENT| FILTERS
|COMPONENT| ACEBO
|COMPONENT| 3GG
|COMPONENT| ARTRIGHT
|COMPONENT| DREAMAKR
|COMPONENT| METRO
|COMPONENT| MGI
|COMPONENT| ONEMILEUP
|COMPONENT| TMAKR
|HELP| .f
.ap
.nj
        Utilities & Sample Clip Art are provided for Artline. These
selections are optional.
.f
|DIRECTIONS| .f
.ap
.nj
        This menu allows you to select Utilities and sample Clip Art.
These selections are optional. The sample Clip Art requires approximately
4.7 megabytes of disk space if all samples are selected.
.f
|END| NEW_INSTALL


|AGGREGATE| FILTERS
|DISPLAY| Font Conversion Utilities
|HELP| .f
.ap
.nj
        A font conversion utility is provided with Artline.
Press Enter to toggle your selection of this option to indicate
whether or not you want to convert fonts for use in Artline.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection to indicate whether or not
you want to copy the font conversion utility.  De-selecting this item will
not install the font conversion utility.
.f
|SOURCE| FLOPPY/
|ARCHIVE| FILTER.DRI
|PROMPT| Insert disk labeled Fonts and Clip Art 1 into the source drive.
|DIRECTORY| APPLDIR/CONVERT\
|FILES| *.*
|END| FILTERS


|AGGREGATE| ACEBO
|DISPLAY| Sample Clip Art from Acebo
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
Acebo. You will need approximately 200 Kilobytes of disk space. Refer to
the Artline Clip Art Gallery document for additional information. De-select
this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Fonts and Clip Art 1 into the source drive.
|ARCHIVE| ACEBO.DRI
|DIRECTORY| APPLDIR/ARTWORK\ACEBO\
|FILES| *.*
|SUPERSEDES| *.*
|END| ACEBO


|AGGREGATE| 3GG
|DISPLAY| Sample Clip Art from 3G Graphics
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
3G Graphics. You will need approximately 800 Kilobytes of disk space. Refer to
the Artline Clip Art Gallery document for additional information. De-select
this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 2 into the source drive.
|ARCHIVE| 3GSAMPLE.DRI
|DIRECTORY| APPLDIR/ARTWORK\3GSAMPLE\
|FILES| *.*
|SUPERSEDES| *.*
|END| 3GG


|AGGREGATE| ARTRIGHT
|DISPLAY| Sample Clip Art from ArtRight
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
ArtRight. You will need approximately 400 Kilobytes of disk space. Refer to
the Artline Clip Art Gallery document for additional information. De-select
this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 2 into the source drive
|ARCHIVE| ARTRIGHT.DRI
|DIRECTORY| APPLDIR/ARTWORK\ARTRIGHT\
|FILES| *.*
|SUPERSEDES| *.*
|END| ARTRIGHT


|AGGREGATE| DREAMAKR
|DISPLAY| Sample Clip Art from Dream Maker Software
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
Dream Maker Software. You will need approximately 600 Kilobytes of disk space.
Refer to the Artline Clip Art Gallery document for additional information.
De-select this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 2 into the source drive
|ARCHIVE| CLIPTURE.DRI
|DIRECTORY| APPLDIR/ARTWORK\CLIPTURE\
|FILES| *.*
|SUPERSEDES| *.*
|END| DREAMAKR


|AGGREGATE| METRO
|DISPLAY| Sample Clip Art from Metro ImageBase
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
Metro ImageBase. You will need approximately 600 Kilobytes of disk space.
Refer to the Artline Clip Art Gallery document for additional information.
De-select this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 2 into the source drive
|ARCHIVE| METRO.DRI
|DIRECTORY| APPLDIR/ARTWORK\METRO\
|FILES| *.*
|SUPERSEDES| *.*
|END| METRO


|AGGREGATE| MGI
|DISPLAY| Sample Clip Art from Marketing Graphics
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
Marketing Graphics. You will need approximately 275 Kilobytes of disk space.
Refer to the Artline Clip Art Gallery document for additional information.
De-select this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 3 into the source drive
|ARCHIVE| MGIGEM.DRI
|DIRECTORY| APPLDIR/ARTWORK\PICTURE.PAK\
|FILES| *.*
|SUPERSEDES| *.*
|END| MGI


|AGGREGATE| ONEMILEUP
|DISPLAY| Sample Clip Art from One Mile Up
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
One Mile Up. You will need approximately 1 megabyte of disk space. Refer to
the Artline Clip Art Gallery document for additional information. De-select
this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 3 into the source drive
|ARCHIVE| FEDERAL.DRI
|DIRECTORY| APPLDIR/ARTWORK\FEDERAL\
|FILES| *.*
|SUPERSEDES| *.*
|END| ONEMILEUP


|AGGREGATE| TMAKR
|DISPLAY| Sample Clip Art from T/Maker
|HELP| .f
.ap
.nj
        Sample Clip Art is provided for Artline.  Press Enter to
toggle selection of this option to indicate whether or not you want them.
.f
|DIRECTIONS| .f
.ap
.nj
        Press Enter to toggle your selection of Artline Clip Art from
T/Maker. You will need approximately 800 Kilobytes of disk space.
Refer to the Artline Clip Art Gallery document for additional information.
De-select this option if you do not want to copy them.
.f
|SOURCE| FLOPPY/
|PROMPT| Insert disk labeled Clip Art 3 into the source drive
|ARCHIVE| CLICKAR1.DRI
|DIRECTORY| APPLDIR/ARTWORK\CLICKART\
|FILES| *.*
|SUPERSEDES| *.*
|ARCHIVE| CLICKAR2.DRI
|DIRECTORY| APPLDIR/ARTWORK\CLICKART\
|FILES| *.*
|SUPERSEDES| *.*
|END| TMAKR


|AGGREGATE| REVIEW_SELECTIONS
|DISPLAY| Review/Change Selections
|IMMEDIATELY|
|ONLY1|
|CONTINUE| .f
.ap
.nj
        Press Enter to continue with the Artline installation. 
File copying will begin when you continue from this menu.
.f
|COMPONENT| RS_SHOW_CUR
|COMPONENT| RESTART
|DIRECTIONS| .f
.ap
.nj
        This concludes the selection phase of SETUP.  You may now
review your selections by choosing "Show Current,"  change your
selections, or begin the Artline installation.
.f
|END| REVIEW_SELECTIONS


|AGGREGATE| RS_SHOW_CUR
|DISPLAY| Display Current Selections
|SHOWCUR|
|IMMEDIATELY|
|DIRECTIONS| .f
.ap
.nj
        Press Enter to display all of your current selections.
.f
|END| RS_SHOW_CUR


|AGGREGATE| RESTART
|DISPLAY| Alter your Current Selections
|DIRECTIONS| .f
.ap
.nj
        Press Enter to review and/or change your selections.
.f
|GOTO| SCREENS
|END| RESTART


|AGGREGATE| INSTALL
|DISPLAY| Artline Installation Window
|HELP| .f
.ap
.nj
        Select this menu item to begin the Artline installation.

|DIRECTIONS| .f
.ap
.nj
        Select this menu item to begin the Artline installation.
.f
|SOURCE| FLOPPY/
|VOLUME| SETUP.EXE
|PROMPT| Insert disk labeled System into the source drive.
|DIRECTORY| SYSDIR/
|FILES| ARTLINE.CFG

|END| INSTALL


|AGGREGATE| GOODBYE
|DISPLAY| Application Notes
|HELP| .f
.ap
.nj
        This file contains the product introduction and any installation
notes you should be aware of.
.f
|DIRECTIONS| .f
.ap
.nj
        This menu item contains notes and tips you should be aware of
when using Artline.
.f
|SOURCE| APP/SETUP\
|PROMPT| Insert disk labeled Setup and Application into the source drive.
|VOLUME| ALGOODBY.TXT
|PAGE| ALGOODBY.TXT
|END| GOODBYE


|AGGREGATE| SHOW_CURRENT
|DISPLAY| Current Artline Selections
|CONTINUE| .f
.ap
.nj
.s
.ce on
.bd on
Artline Installation
.br
Digital Research Inc.
.br
Copyright (c) 1990
.bd off
.ce off
.s 2
|DIRECTORY| APP/SETUP\
|FILES| DRINSTAL.TMP
|END|  SHOW_CURRENT
